Veloci No.08 Pick-Up Cr-Mo Steel Fork
Veloci No.08 Pick-UP CrMo Steel Fork
Introducing the VELOCI No.08 PICK-UP CR-MO Steel Fork. Transforming your bike into a versatile utility pick-up with the VELOCI No.08 fork. Designed to accommodate a 20” front wheel, this fork allows for a lower platform placement, effectively reducing the center of gravity and making loads easier to manage while riding.
Key Features:
-
·Versatile Platform: The perfectly sized platform is ideal for securing large baskets, milk crates, or post office bins. Detachable for convenience, it's there when you need it and gone when you don't.
-
·Integrated Mounts: Comes equipped with light mounts and fender mounts, ensuring you're prepared for all conditions.
-
Compatibility: Designed to replace forks with an axle-to-crown length of approximately 400mm and a head tube angle of about 70~72 degrees. It's suitable for bikes with tire clearances ranging from 650Bx48c to 700x42c, including models like VELOCI PLAN BIG, DISKO 80’S, DISKO KING, JIMMY, SURLY CROSSCHECK, LONG HAUL TRUCKER, MIDNIGHT SPECIAL, PREAMBLE, STRAGGLER, and DISC TRUCKER. Of course includes most of big-hit 26” rigid fork mountain bikes.
-
If your fork's axle-crown length differs from 400mm, expect changes to your bike's head tube angle, seat tube angle, and bottom bracket height. Typically, for every 10mm deviation in axle-crown length, frame angles adjust by about 1 degree, and the bottom bracket height shifts by approximately 5mm. Installing the PICK-UP FORK on a bike with an original fork longer than 400mm will make the angles steeper and lower the bottom bracket. Conversely, if the original fork is shorter than 400mm, angles will become slacker, and the bottom bracket will rise.
Whether you're navigating city streets, taking your pets for a ride, or embarking on a bike tour, the VELOCI No.08 offers the convenience and stability you need.
Specs:
Steerer Type: 1-1/8"
Steerer Length: 300mm
Fork Length (Axle to Crown): 492mm (Designed to replace a 400mm A-C Fork)
Material: Cro-Mo Steel
Rake: 42mm
Axle: 12 x 100mm Thru Axle, P1.5
Crown Diameter: 39mm
Brake Type: IS Mount
Rotor (Maximum): 180mm
Tye (Maximum Width): 20 x 2.4" with Fender
Fender & Rack Mounts: Yes
Cage Mounts: NIL
Cable Routing: Outer
Weight: 1900g (Fork only with Axle) / 2550g (Fork + Platform)
Platform Size: 280 x 310mm
Max Load Weight: 15kg
Made in Taiwan.
https://www.velocicycle.com/no08-pickup-fork
Note: We provide complete setup from 20" wheelbuild to installation to your existing bike. To check if your existing bike will fit, please kindly contact us.